Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual page 120

Hard disk drive (HDD) / solid state disk (SSD)
Preliminary steps
▶ Locate the correct drive bay, see
Removing a 2.5-inch HDD/SSD dummy module
The dummy module is the installation frame without an installed HDD/
SSD.
Figure 79: Removing a 2.5-inch HDD/SSD dummy module
▶ Pull the green locking clip (1) and open the locking lever (2).
▶ Pull the dummy module out of its bay (3).
Installing a 2.5-inch HDD/SSD module
▶ Install the HDD/SSD in the installation frame, see
SSD in a 2.5-inch installation frame" on page
120
"Overview of configurations" on page
Upgrade and Maintenance Manual
"Installing a 2.5-inch HDD/
117.
119.
GX2560 M7