▶
"Getting access to the component" on page
▶
"Extending the server out of the rack" on page
▶
"Removing the server from the rack" on page
▶
"Removing the cover 1" on page
▶ Release all HDD/SSD modules and pull them out a few centimeters, see
"Removing a 2.5-inch HDD/SSD module" on page
CAUTION
The HDD/SSD modules need not to be removed.
▶
If you want to remove them nevertheless, check if all HDD/SSD
modules are uniquely identified so that you can reinsert them
into their original bays.
▶ Release all HDD/SSD dummy modules and pull them out a few centimeters,
see
"Removing a 2.5-inch HDD/SSD dummy module" on page
Removing the defective HDD backplane
Figure 83: Disconnecting the cables
▶ Disconnect all cables from the HDD backplane.
GX2560 M7
Hard disk drive (HDD) / solid state disk (SSD)
46.
Upgrade and Maintenance Manual
39.
39.
41.
123.
120.
127