Handling The Crossbar; Removing The Crossbar - Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 28: Connecting the cables
▶ Connect the cables connected to the riser card to the system board.
You find the corresponding connectors in the cable plan, see
"Appendix B" on page
4.10

Handling the crossbar

4.10.1

Removing the crossbar

Required steps before:
– Extending the server out of the rack
– Removing the server from the rack
– Removing the cover 2
– Removing the air duct
– Removing the riser module
Tool: Phillips PH2 / (+) No. 2 screwdriver
66
325.
Upgrade and Maintenance Manual GX2560 M7