Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB Installation Guide
Once the eNB is installed at the outdoor location, the other end of the ground cable needs to connect to
a reliable grounding point (earth), as shown in Figure 3-19.
Figure 3-19: Connecting Cables and Grounding Screws
3.5.3 Global Positioning System Antenna Grounding
When installing a GPS antenna, if the length of the antenna is more than 16.4 feet (5 m), it is recommended
to extend the installation distance. As per the safety guidelines, it is recommended that lightning
protection be added to the GPS antenna by adding a lightning protector. The lightning protector should be
connected to the grounding bar, as shown in Figure 3-20.
Figure 3-20: GPS Grounding
27