Configure The Management Server; Figure 3-30: Static Routing; Table 3-3: Static Routing - Baicells Nova436Q Installation Manual

Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB Installation Guide

Figure 3-30: Static Routing

NOTE: For each field description, refer to the
CAT6/CAT15 CPE Configuration

Table 3-3: Static Routing

Field Name
Index
Enable
Destination Network
Netmask
Gateway

3.8.5 Configure the Management Server

In the BTS Setting > Management Server window, enter the NMS information (Figure 3-31). When using
the Baicells CloudCore to manage the network, in the http:// field, enter the following URL address and
port number: http://baiomc.cloudapp.net:8443/smallcell/AcsService.
If you are using Local OMC or another NMS, enter its server address and port number. Refer to the field
descriptions in Table 3-4.
Atom CAT4 CPE Configuration Guide
Guide.
Description
Auto-generated static route index number.
Enable/Disable the static route.
The destination IP address.
The subnet mask of the destination IP address.
The target IP address' gateway IP address.
37
and Atom