Table of Contents
Advertisement
7700 MultiFrame Manual
7760VMS-HD HD Video Monitoring Splitter
2.
INSTALLATION
The 7760VMS-HD comes with a companion rear plate that occupies two slots in the frame.
information on inserting the module into the frame see the 7700FR chapter section 3.
2.1.
HD AND SD VIDEO INPUTS AND OUTPUTS
HD/SDI INPUT A, B: Input BNC connectors for 10-bit serial digital signals compatible with the
SMPTE 292M or SMPTE 259M-C standards. The HD/SDI INPUT A connector is
the Primary input and the HD/SDI INPUT B connector is for the Secondary input.
Both input video feeds must be clock-locked to the genlock signal in order to
properly split the picture.
HD/SDI OUT A:
These three BNC connectors are reclocked outputs from the HD/SDI INPUT A
connector.
HD/SDI OUT B:
This BNC connector is a reclocked output from the HD/SDI INPUT B connector.
Page - 2
Figure 2-1: 7760VMS-HD Rear IO Module
Revision 0.3
For
Advertisement
Table of Contents
