Chapter 1: Overview - Aerotech VascuLathe ACS Series User Manual

®
VascuLathe -ACS Hardware Manual

Chapter 1: Overview

®
The VascuLathe -ACS series dual axis positioning stage represents a revolutionary approach to satisfying
the demanding requirements of tubular manufacturing applications. This fully integrated motion system cou-
ples automated material handling with high performance direct drive linear and rotary motion.
®
The VascuLathe -ACS has been designed with a collet chuck that supports ER25 or ER40 collets (man-
ufactured to DIN6499 specs) to allow for a wide range of materials and applications. This product is intended
for light industrial manufacturing or laboratory use.
Figure 1-1:
N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. Refer to the most recent edition of the Aerotech Motion Control Product Guide for the most current
product information at www.aerotech.com.
N O T E : This manual should be read in its entirety before operating the VascuLathe
N O T E : For the wet cut option, it is recommended that the rotary seal be replaced before 1000 hours of
service. Failure to follow the maintenance procedures outlined in
Replacement will result in voiding of warranty.
D A N G E R : To minimize the possibility of electrical shock and bodily injury or death, dis-
connect all electrical power prior to making any electrical connections.
www.aerotech.com
®
VascuLathe -ACS Series Positioning Stage
Chapter 1
®
-ACS system.
Section 4.3.3. Wet Cut Rotary Union Seal
Overview
1