Aerotech VascuLathe ACS Series User Manual page 51

®
VascuLathe -ACS Hardware Manual
Step 3: Remove the shoulder bolt and bushing (see
Step 4: Using a 25 mm wrench on the rotary union nut and a 27 mm wrench on the VascuLathe
coming in from the top of the carriage, unscrew the rotary union from the VascuLathe
(see Figure 4-14).
Step 5: Install a new rotary union assembly by attaching it to the rear of the VascuLathe
Tighten to 10 ft-lbs.
Step 6: Tighten the shoulder bolt and bushing.
Step 7: Reattach all covers.
Step 8: Restore power to the stage.
www.aerotech.com
Figure
Figure 4-14: Wet Cut Rotary Union Installation
Chapter 4
4-14).
Maintenance
®
-ACS shaft
®
-ACS shaft
®
-ACS shaft.
43