Safety Procedures And Warnings - Aerotech VascuLathe ACS Series User Manual

Overview

1.5. Safety Procedures and Warnings

The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment. Operators should be trained before operating this equipment.
D A N G E R : To minimize the possibility of electrical shock and bodily injury or death, dis-
connect all electrical power prior to making any electrical connections.
D A N G E R : To minimize the possibility of electrical shock and bodily injury or death when any
electrical circuit is in use, ensure that no person comes in contact with the circuitry when the
VascuLathe
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical power
prior to making any mechanical adjustments.
D A N G E R : Moving parts of the VascuLathe
personnel must remain clear of any moving parts.
W A R N I N G : If the VascuLathe
the protection provided by the VascuLathe
injury or death.
W A R N I N G : Cables can pose a tripping hazard. Securely mount and position all
VascuLathe
W A R N I N G : Do not expose the VascuLathe
specified range of operating environments. Operation in conditions other than those specified
can cause damage to the equipment.
W A R N I N G : The VascuLathe
result in injury and damage to the equipment.
W A R N I N G : Use care when moving the VascuLathe
the VascuLathe
W A R N I N G : Only trained personnel should operate, inspect, and maintain the VascuLathe
ACS.
W A R N I N G : This VascuLathe
oratory use. Use of the VascuLathe
damage to the equipment.
W A R N I N G : Before using this VascuLathe
determine the needed safety requirements.
8
®
-ACS is connected to a power source.
®
-ACS is used in a manner not specified by the manufacturer,
®
-ACS cables to avoid potential hazards.
®
-ACS must be mounted securely. Improper mounting can
®
-ACS can result in injury.
®
-ACS is intended for light industrial manufacturing or lab-
®
-ACS for unintended applications can result in injury and
Chapter 1
®
VascuLathe -ACS Hardware Manual
®
-ACS can cause crushing or shearing injuries. All
®
-ACS can be impaired and result in damage, shock,
®
-ACS to environments or conditions outside the
®
-ACS. Manually lifting or transporting
®
-ACS, perform an operator risk assessment to
®
www.aerotech.com
-