Related Manuals for Aerotech VascuLathe ASR Series
Summary of Contents for Aerotech VascuLathe ASR Series
- Page 1 ® VascuLathe -ASR Series Stage User’s Manual P/N: EDS115 (Revision 1.05.00) Dedicated to the Science of Motion Aerotech, Inc. 101 Zeta Drive, Pittsburgh, PA, 15238 Phone: 412-963-7470 Fax: 412-963-7459 www.aerotech.com...
- Page 2 December 2, 2008 Revision 1.02.00 October 14, 2008 Revision 1.01.00 August 28, 2008 Revision 1.00.00 October 19, 2006 Product names mentioned herein are used for identification purposes only and may be trademarks of their respective companies. © Aerotech, Inc. 2011...
-
Page 3: Table Of Contents
4.3.2. Ringseal O-Ring Replacement 4.3.3. Wet Cut Rotary Union Seal Replacement 4.4. Wet Cut Rotary Union Removal 4.5. Linear Lubrication and Cleaning Process 4.6. Linear Spar Cover Removal Appendix A: Warranty and Field Service Appendix B: Technical Changes Index Reader's Comments www.aerotech.com... - Page 4 ® Table of Contents VascuLathe -ASR Hardware Manual www.aerotech.com...
- Page 5 Removing the Inside Spar Cover Figure 4-14: Removing the Outer Spar Cover Figure 4-15: Removing the Carriage Side Cover Figure 4-16: Removing M4 MHCS Screws Figure 4-17: Releasing Tension on the Belt Figure 4-18: VascuLathe®-ASR with Belts Folded Back www.aerotech.com...
- Page 6 ® List of Figures VascuLathe -ASR Hardware Manual www.aerotech.com...
- Page 7 List of Tables List of Tables Table 1-1: Model Numbering System Table 3-1: Environmental Specifications Table 3-2: VascuLathe®-ASR Series Specifications Table 3-3: VascuLathe®-ASR Rotary Motor Specifications Table 3-4: VascuLathe®-ASR Linear Motor Specifications Table B-1: Current Changes (1.05.00) Table B-2: Archived Changes www.aerotech.com...
- Page 8 ® List of Tables VascuLathe -ASR Hardware Manual viii www.aerotech.com...
-
Page 9: Chapter 1: Overview
DIN6499 specs) to allow for a wide range of materials and applications. This product is intended for light industrial manufacturing or laboratory use. ® This manual describes Aerotech’s VascuLathe -ASR series dual axis positioning stage. Figure 1-1 shows a ®... - Page 10 -ASR Hardware Manual N O T E : Aerotech continually improves its product offerings, and listed options may be superseded at any time. Refer to the most recent edition of the Aerotech Motion Control Product Guide for the most current product information at www.aerotech.com.
-
Page 11: Standard Features
® The VascuLathe -ASR is offered with a non contacting linear encoder with an achievable resolution of .001 µm, and accuracies of ±1.0 µm. Travels available are 200 mm to 300 mm. www.aerotech.com Chapter 1... -
Page 12: Rotary Axis
It is configured in a “fail-safe” normally-closed mode where full clamping force is applied when no air pressure is present. N O T E : Aerotech recommends using electro-polished collets manufactured to DIN6499 specs. ®... -
Page 13: Optional Features
N O T E : If wet cutting, the purchase of a ringseal will also be required based on the tube diameter used in the cutting application. Consult Aerotech for more information. 1.2.3. Tooling Options ®... -
Page 14: Pneumatics
® The VascuLathe -ASR stage is part of a complete Aerotech motion control system, which is adjusted at the factory for optimum performance. Setup involves connecting a stage to the appropriate drives with the cables provided. Refer to your electrical documentation package for further information. -
Page 15: Model Numbers
Gripper with X/Y bushing alignment Gripper Only Gripper Jaws -J0-10 Gripper jaws for tube diameters ranging from 0 mm –10 mm Pneumatics -PNG Pneumatics kit for ER collet and optional gripper Pneumatics kit for ER collet Pneumatics kit, filter/dryer assembly only www.aerotech.com Chapter 1... -
Page 16: Dimensions
Overview VascuLathe -ASR Hardware Manual 1.4. Dimensions ® The following figure illustrates the basic dimensions for the VascuLathe -ASR. The latest version of this fig- ure is available on Aerotech's website. ® Figure 1-3: VascuLathe -ASR Dimensions Chapter 1 www.aerotech.com... -
Page 17: Safety Procedures And Warnings
If the stage is used in a manner not specified by the manufacturer, the protection provided by the stage can be impaired. Stage cables can pose a tripping hazard. Securely mount and position all stage cables to avoid potential hazards. www.aerotech.com Chapter 1... - Page 18 This stage is intended for light industrial manufacturing or laboratory use. Use of the stage for unintended applications can result in injury and damage to the equipment. Before using this stage, perform an operator risk assessment to determine the needed safety requirements. Chapter 1 www.aerotech.com...
-
Page 19: Ec Declaration Of Incorporation
101 Zeta Drive Pittsburgh, PA 15238 herewith declares that the product: ® Aerotech, Inc. VascuLathe -ASR Stage is intended to be incorporated into machinery to constitute machinery covered by the Directive 2006/42/EC as amended; does therefore not in every respect comply with the provisions of this directive;... - Page 20 ® Overview VascuLathe -ASR Hardware Manual Chapter 1 www.aerotech.com...