Model Numbers; Table 1-1: Model Numbering System - Aerotech VascuLathe ACS Series User Manual

Overview

1.3. Model Numbers

The stage model number indicates the optional features on a particular stage.
Example: VascuLathe-ACS-300S-ER25-WC-AG-J0-10-PNG
Table 1-1: Model Numbering System
VascuLathe, Direct Drive Linear and Rotary Motion
-ACS
Linear Travel / Cable Management System (CMS) Style
-200S
-200C
-300S
-300C
Collet Type
-ER25
-ER40
Wet Cut / Dry Cut
-DC
-WC
Gripper
-AG
-G
Gripper Jaws
-J0-10
-J8-18
-J16-26
-J24-34
-J32-40
Pneumatics
-PNG
-PN
-FD
6
VascuLathe
Direct drive rotary stage with integral ER-style collet chuck
200 mm linear travel, with standard cms configuration
200 mm linear travel, with covered cms configuration
300 mm linear travel, with standard cms configuration
300 mm linear travel, with covered cms configuration
Air-actuated ER25 collet chuck, normally closed
Supports tube diameters from 1 mm to 16 mm
Air-actuated ER40 collet chuck, normally closed
Supports tube diameters from 15.5 mm to 30 mm
Dry cut, standard option for both ER25 and ER40 configurations
Wet cut, used only on ER25 configuration. Limits tube size to 12 mm dia.
Gripper with X/Y bushing alignment
Gripper Only
Gripper jaws for tube diameters ranging from 0 mm –10 mm
Gripper jaws for tube diameters ranging from 8 mm –18 mm
Gripper jaws for tube diameters ranging from 16 mm –26 mm
Gripper jaws for tube diameters ranging from 24 mm –34 mm
Gripper jaws for tube diameters ranging from 32 mm –40 mm
Pneumatics kit for ER collet and optional gripper
Pneumatics kit for ER collet
Pneumatics kit, filter/dryer assembly only
Chapter 1
®
-ACS Hardware Manual
www.aerotech.com