Pneumatics Option; Electronics / Controller Option - Aerotech VascuLathe ACS Series User Manual

®
VascuLathe -ACS Hardware Manual

1.2.5. Pneumatics Option

This option is offered in three configurations and is supplied with every VascuLathe
figurations (-PNG and -PN) include the required filters, driers, solenoids, relays, fittings, valves, and hose
required to connect the VascuLathe
assembly to condition the incoming air.
-PNG: This option will supply the pneumatics to control the air supply to both the collet and the optional
l
gripper.
-PN: This option is ordered when the pneumatics to control the air supply are required for the collet only.
l
-FD: This option is ordered when the customer will implement their own pneumatics controls. The
l
filter/dryer assembly is supplied to guarantee the conditioning of incoming air.
Refer to the documentation package shipped with your system for proper interconnection of the pneumatics.

1.2.6. Electronics / Controller Option

®
The VascuLathe -ACS stage can be purchased as part of a complete Aerotech motion control system,
which is adjusted at the factory for optimum performance. If bought as a complete system, setup usually
involves connecting a stage to the appropriate drives with the cables provided. Refer to your electrical doc-
umentation package for further information.
www.aerotech.com
®
-ACS. The third configuration (-FD) includes only the filter and dryer
Chapter 1
Overview
®
-ACS system. Two con-
5