Ec Declaration Of Incorporation - Aerotech VascuLathe ACS Series User Manual

®
VascuLathe -ACS Hardware Manual

1.6. EC Declaration of Incorporation

Manufacturer: Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238
USA
herewith declares that the product:
Aerotech, Inc. VascuLathe
is intended to be incorporated into machinery to constitute machinery covered by the Directive
2006/42/EC as amended;
does therefore not in every respect comply with the provisions of this directive;
and that the following harmonized European standards have been applied:
EN ISO 12100-1,-2:2003+A1:2009
Safety of machinery - Basic concepts, general principles for design
ISO 14121-1:2007
Safety of machinery - Risk assessment - Part 1: Principles
EN 60204-1:2005
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
and further more declares that
it is not allowed to put the equipment into service until the machinery into which it
is to be incorporated or of which it is to be a component has been found and
declared to be in conformity with the provisions of the Directive 2006/42/EC and
with national implementing legislation, i.e. as a whole, including the equipment
referred to in this Declaration.
This is to certify that the aforementioned product is in accordance with the applicable
requirements of the following Directive(s):
2011/65/EU
Authorized Representative:
Address:
Name
Position
Location
Date
www.aerotech.com
®
-ACS Stage
RoHS 2 Directive
Manfred Besold
AEROTECH GmbH
Süd-West-Park 90
D-90449 Nürnberg
/ Alex Weibel
Engineer Verifying Compliance
Pittsburgh, PA
September 2010
Chapter 1
Overview
9