Opto-Isolated Outputs (J105); Table 2-26: Port 0 Digital Output Connector Pin Assignment (J105); Table 2-27: Digital Output Specifications - Aerotech Ensemble CL Hardware Manual

Installation and Configuration

2.5.3. Opto-Isolated Outputs (J105)

All outputs are rated for 24 VDC and 80 mA per output. The outputs are software configurable as current
sinking (see Figure 2-32) or current sourcing (see
Table 2-26: Port 0 Digital Output Connector Pin Assignment (J105)
Pin# Description
7 Opto-Isolated Output 0
8 Opto-Isolated Output 1
9 Opto-Isolated Output 2
15 Output Common
16 Opto-Isolated Output 3
Table 2-27: Digital Output Specifications
PS2802-4 Opto Device Specifications
Maximum Voltage
Maximum Sink/Source Current
Output Saturation Voltage
Output Resistance
Rise / Fall Time
Maximum Output Frequency
N O T E : Outputs must be connected as all sourcing or all sinking.
www.aerotech.com
Figure 2-33) .
24 V maximum
80 mA/channel @ 20°C; 60 mA/channel @ 50°C
2.75 V at maximum current
250 usec (typical)
Chapter 2
Ensemble CL
In/Out/Bi
Output
Output
Output
-
Output
Value
33 Ω
1 kHz
49