Beckhoff EL3681 Documentation page 69

Commissioning
Fig. 56: Adding the programming environment in "PLC"
In the dialog that opens, select "Standard PLC project" and enter "PLC_example" as project name, for
example, and select a corresponding directory:
Fig. 57: Specifying the name and directory for the PLC programming environment
The "Main" program, which already exists due to selecting "Standard PLC project", can be opened by
double-clicking on "PLC_example_project" in "POUs". The following user interface is shown for an initial
project:
EL3681 Version: 3.0 69