Beckhoff EL3681 Documentation page 113

• A description may also be provided:
• Explanation of the dialog box:
Name
Description
Options Keep modules
AoE | Set AmsNetId
EoE | Set MAC and IP
CoE | Set cycle
time(0x1C3x.2)
ESI
Export
• A list view is available for multiple selections (Export multiple SCI files):
• Selection of the slaves to be exported:
◦ All:
All slaves are selected for export.
EL3681
Name of the SCI, assigned by the user.
Description of the slave configuration for the use case, assigned by the user.
If a slave supports modules/slots, the user can decide whether these are to be exported or
whether the module and device data are to be combined during export.
The configured AmsNetId is exported. Usually this is network-dependent and cannot
always be determined in advance.
The configured virtual MAC and IP addresses are stored in the SCI. Usually these are
network-dependent and cannot always be determined in advance.
The configured cycle time is exported. Usually this is network-dependent and cannot
always be determined in advance.
Reference to the original ESI file.
Save SCI file.
Version: 3.0
Commissioning
113