Beckhoff EL3681 Documentation page 166

Commissioning
• Activate and confirm the configuration (Fig. Activation of the configuration + Confirming the activation
of the configuration)
Fig. 156: Activation of the configuration
Fig. 157: Confirming the activation of the configuration
• Confirm new variable mapping, restart in RUN mode (Fig. Generate variable mapping + Restarting
TwinCAT in RUN mode)
Fig. 158: Generating variable mapping
Fig. 159: Restarting TwinCAT in RUN mode
• In TwinCAT PLC, under the "Project" menu, select "Rebuild all" to compile the project (Fig. Compile
project)
166 Version: 3.0 EL3681