Beckhoff EL3681 Documentation page 115

• Display SCI devices and select and insert the desired device:
Additional Notes
• Settings for the SCI function can be made via the general Options dialog
(Tools → Options → TwinCAT → Export SCI):
Explanation of the settings:
Default export AoE | Set AmsNetId
options
CoE | Set cycle time(0x1C3x.2)
EoE | Set MAC and IP
Keep modules
Generic Reload Devices
EL3681
Default setting whether the configured AmsNetId is exported.
Default setting whether the configured cycle time is exported.
Default setting whether the configured MAC and IP addresses are exported.
Default setting whether the modules persist.
Setting whether the Reload Devices command is executed before the SCI
export.
This is strongly recommended to ensure a consistent slave configuration.
Version: 3.0
Commissioning
115