4.
Carefully lower the robotic head onto the head mounting plate and
rotate to align the mounting screw holes. Secure in position with
the four head fixing bolts and washers provided.
Fitting the Camera and Accessories
WARNING! Before fitting equipment, refer to the installation
instructions supplied with the robotic head, camera and any
accessories. To ensure safe operation, the payload must be
correctly balanced following installation.
When the robotic head has been secured to the FE-165, the camera,
lens and any other accessories such as a prompter can be fitted.
WARNING! Ensure that all equipment being fitted has been
correctly assessed. See the section Payload Assessment
on page 14.
!
Installation
17