Printing Specifications; Table 4 Print Speed Specifications; Table 5 Character Specifications - TransAct POSjet 1500 Programmer's Manual

Features/Specifications

Printing Specifications

Printing method:
Cartridge arrangement:
Print dot pitch:
Printing directions:
Paper feed pitch:
Validation Type:
Number of Validation lines:
Receipt print zone (maximum):
Validation print zone:
Characters per Line
10
20
30
40
Print Pitch Capability
(Characters per Inch)
Font Half Wide
(Max CPI)
1
Print speed is calculated with the 12 x 12 single wide font at 17.3 cpi and 8 lpi spacing. If head maintenance
needs to be done, the print speed will be less.
2
The value is based on a single full 2.5" print line printing single width, small draft font. Line feed time is not
included.
Page 10
®
POSjet 1500
Thermal ink jet
12 nozzle
0.0096" (0.244 mm)
Bi-directional, logic seeking
Default - 0.125" (1/8" or 3.175 mm)
Independent
Max. 9 lines (1.53") @ 6 lpi. 12 lines @ 8 lpi.
2.5" (63.5 mm)
Refer to "Validation Form Requirements" on pg. 16.

Table 4 Print Speed Specifications

Single- Double-
wide (Max wide
CPI)

Table 5 Character Specifications

Rev M
Minimum Lines per Second
12
10
8
6
Max Characters/Line
(2.5-inch Print Zone)
Max Typ Dbl-wide
Programmer's Guide
1
Approximate
Characters
per Second
Nov-07