TransAct POSjet 1500 Programmer's Manual page 184

Control Codes
Carbon Copy Journal Mode
Carbon copy mode allows information sent to the receipt or validation station to be copied into the electronic
journal. An electronic journal entry is started with a "Start Carbon Copy" mode command and continues until a
station select command is received or a "Stop Carbon Copy" command is received. The carbon copy operation may
be suspended and restarted by a "Carbon Copy Suspend" and "Carbon Copy Resume" command. (Note. "Carbon
Copy Suspend" and "Carbon Copy Resume" commands do not generate new electronic journal records.)
Function Electronic Carbon Copy Begin
ASCII
[ESC]l <3>
Hexadecimal 1BH 6CH<3>
Decimal <27> <108><3>
IPCL
&%EB
EPOS
Description
This command begins a carbon copy journal entry.
Function Electronic Carbon Copy Suspend
ASCII
[ESC]l <2>
Hexadecimal 1BH 6CH<2>
Decimal <27><108><2>
IPCL
&%ES
EPOS
Description
This command temporarily suspends carbon copy journal entry.
Function Electronic Carbon Copy Resume
ASCII [ESC]l <1>
Hexadecimal 1BH 6CH<1>
Decimal <27><108><1>
IPCL
&%ER
EPOS
Description
This command resumes a temporarily suspended carbon copy journal entry.
Function Electronic Carbon Copy End
ASCII [ESC]l <0>
Hexadecimal 1BH 6CH<0>
Decimal <27> <108><0>
IPCL
&%EE
EPOS
Description
This command ends a carbon copy journal entry.
Page 170
®
POSjet 1500
Rev M
Programmer' s Guide
Nov-07