Unpack The Printer; Figure 11 Unpacking Instructions - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide

Unpack the Printer

Be sure to save the box and packing materials in case you need to send the printer in for service. TransAct
Technologies is not responsible for damaged return items that are not packaged in original shipping material. Refer
to "Return Materials Authorization and Return Policies", on page iv for information on what to do if you have to
return your printer for repair.
1. Open the box and remove the printer and all items. Check to make sure that all items are present.
• ®
POSjet
•
Ink Cartridge(s)
•
Paper Roll (located under the paper cover)
•
PowerPocket
•
AC Power Cord (optional)
•
Configuration Summary Receipt
2. Separate the printer from the packing material. Reverse steps when repacking for return shipment.
3. Check the printer for any signs of damage. If the printer or any parts are damaged, report it to your supplier and
shipper immediately.
Nov-07
POSjet

Figure 11 Unpacking Instructions

1500 Printer
®
Power Supply: located in cabinetry base (optional)
Rev M
®
1500 Codes and Commands
Page 21