TransAct POSjet 1500 Programmer's Manual page 240

EPOS Control Codes
ASCII [ESC] S
Hexadecimal 1BH 53H
Decimal
<27> <83>
Description ESC S Switches from page mode to standard mode with out printing the page. All page definition
is lost.
Function Select Page Mode Entry Direction
ASCII [ESC] T <n>
Hexadecimal 1BH 54H <n>
Decimal <27> <84>
Description
ESC T Sets the entry direction
This command may also be issued during page definition. When issued in page mode it resets the
orientation and entry position but does not cause the currently defined image to be erased or
printed.
Where
x = 0 for standard orientation (Direction A).
x = 1 for 270° Rotation (Direction B)
x = 2 for 180° Rotation (Direction C)
x = 3 for 90° Rotation (Direction D)
Function Exit Page Mode and print page
ASCII
[FF]
Hexadecimal 0CH
Decimal <12>
Description [FF] Switches from Page mode to standard mode and prints the defined page.
Page 226
®
POSjet 1500
Receipt or
Inserted Form
A > > > > >
> > > > > C
Rev M
Programmer' s Guide
EPOS Only
Initial entry
location
EPOS Only
Nov-07