Table 46 Print Modes - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide
Function Select Print Mode(s)
ASCII [ESC] ! <n>
Hexadecimal
1BH 21H <n>
Decimal
<27> <33> <n>
Range 0 ≤ n ≤ 255
Description
The [ESC] ! <n> command selects print modes using <n> as follows. The default character font is
7 x 9. The defaults for the other print modes are set to <n> = 1.
Bit Off/On
0 Off
On
1,2 -
3 Off
On
4 Off
On
5 Off
On
6 -
7 Off
On
Function Turn ON/OFF Underline Mode
ASCII [ESC] - <n>
Hexadecimal 1BH 2DH <n>
Decimal
<27> <45> <n>
Range
<n> = 0, 1, 48, 49
Description
The [ESC] - <n> command turns on or off underline mode. When <n> = 1 or 49, underline mode
is turned on, and when <n> = 0 or 48, underline mode is turned off. The default setting is <n> = 0.
Function Turn ON/OFF Emphasized Mode
ASCII [ESC] E <n>
Hexadecimal 1BH 45H <n>
Decimal <27> <69> <n>
0 ≤ n ≤ 255
Range
Description The [ESC] E <n> command turns on or off emphasized mode. When the least significant bit
(LSB) of <n> = 1, emphasized mode is turned on; when it is 0, emphasized mode is turned off.
The default setting is <n> = 0. Emphasized and double-strike printing appear the same.
Nov-07
®
POSjet 1500
Hexadecimal Decimal
00H <0>
01H <1>
- -
00H <0>
08H <8>
00H <0>
10H <16>
00H <0>
20H <32>
- -
00H <0>
80H <128>

Table 46 Print Modes

Rev M
EPOS Control Codes
Function
Select 9 x 9 character font.
Select 7 x 9 character font.
Undefined
Emphasized mode is not selected.
Emphasized mode is selected.
Double-height mode is not selected.
Double-height mode is selected.
Double-wide mode is not selected.
Double-wide mode is selected.
Undefined
Underline mode is not selected.
Underline mode is selected.
Page 211