Table of Contents
Advertisement
Control Codes
Printer Color Configuration
)
)
)
)
!
! *
!
!
*
*
*
!
!
!
!
It is not possible to configure the printer to operate with two black cartridges.
•
Do not store a spare cartridge in the second carriage socket position.
•
Always store extra ink cartridges in the unopened original HP packaging until needed.
•
Do not replace an empty ink cartridge with anything but a new ink cartridge that is approved and compatible
•
with the printer.
Ink Cartridge Setup
®
The POSjet
1500 is available with three different printing options and can be reconfigured to accept different ink
cartridge colors. See " Configuration Mode" on page 47 for information on how to change configuration settings.
The standard printer setup is called Single Color. In addition to this, the printer can be operated with a Two Color
Ready, or a Two Color setup. All three of these printing setup options require different printer configuration
settings. The following information highlights the different functionality of each printing option and includes the
corresponding configuration settings that are needed to make each printing option perform correctly.
Single Color Setup
The Single Color printer setup is a factory built option. It is configured to handle a single ink cartridge and cannot be
field upgraded for two-color operation.
When using the POSjet with a single cartridge setup the left ink carriage should contain a single BLACK cartridge,
or a single color ink cartridge.
Orange Carriage Spacer
(used for "Two Color Ready" operation only.)
Printing Setup
Single Cartridge Operation
Page 58
POSjet
Left
Left
Right
Cart.
Cart.
Black
None
or any
color
Table 17 Single Color Printer-Color Configuration Details
Rev M
®
1500
Right
Wiper
Selecting the configuration menu
Fixed
Factory built option. Not able t be updated in the field.
No configuration required for operation.
Programmer' s Guide
settings:
Nov-07
Advertisement
Table of Contents
Troubleshooting
