Table of Contents
Advertisement
Control Codes
Function
Select page mode
ASCII
[ESC] t<x>
Hexadecimal
1BH 74H<x>
Decimal
<27><116><x>
IPCL
&%PM<x
EPOS
[ESC] L
Description
This command activates page mode and sets the orientation.
This command may also be issued during page definition. When issued in page mode it resets the
orientation and entry position but does not cause the currently defined image to be erased or
printed.
You must previously have set the page size (See the [ESC]u command).
Where
x = 0 for standard orientation (Direction A).
x = 1 for 270° Rotation (Direction B)
x = 2 for 180° Rotation (Direction C)
x = 3 for 90° Rotation (Direction D)
Note:
This command saves the current right and left margin and sets them to the maximum values for
the orientation currently defined.
Note:
During page mode definition almost all printer commands are active. The following table lists the
exceptions:
Page 134
POSjet
>
1
Receipt or
Inserted Form
A > > > > >
>
>
Rev M
®
1500
Initial entry
location
>
>
>
C
Programmer' s Guide
Nov-07
Advertisement
Table of Contents
Troubleshooting
