TransAct POSjet 1500 Programmer's Manual page 257

Programmer' s Guide
Function: Set Validation Operation
ASCII:
[ESC] ~ 0 <n>
Hex: 1BH 7EH 30H
Decimal: <27><126><48>
Description: This command reconfigures the operation of the right form sensor during validation.
Where n =
76543210
xxxxxx00
xxxxxx01
xxxxxx10
xxxxxx11
Note:
This command remains in effect until it is reset by a power cycle. It does not alter the default
configuration.
Nov-07
®
POSjet 1500
Bit values
Right form sensor is required for the form to be sensed and must be valid when
the form is fully loaded.
Right form sensor is not required for the form to be sensed but must be valid
when the from is fully loaded.
Right form sensor is not used.
Reserved.
Rev M
Data Processing and
Communications
Page 243