Printing Paper Command - TransAct POSjet 1500 Programmer's Manual

Programmer' s Guide

Printing Paper Command

Select Paper Type for Printing
Function
ASCII
[ESC] c 0 <n>
Hexadecimal
1BH 63H 30H <n>
Decimal
<27> <99> <48> <n>
n = 1, 1 ≤ n ≤ 3, 8 ≤ n ≤ 11
Range
Description ESC c 0 n selects paper type(s) for printing. User's have the option to select either Paper roll or
validation paper. Both bits 0 and 1 indicate paper roll and if either of them is available, the paper
roll is selected as the print sheet. Validation and paper roll can be selected simultaneously, but in
this case, be sure to use a pressure sensitive paper so that the printing result is on the paper roll. At
this time, the setting values for validation are available for ESC 2, ESC 3, GSL, and GS W. This
command is enabled only when processed at the beginning of a line. When previously disabled
validation paper is enabled, the printer waits for the validation to be inserted. When previously
enabled validation paper is disabled, the printer ejects the paper. The default setting is n = 1. The
paper type(s) are selected for printing by using n as follows:
Bit Off/On
0
1
2
3
4–7
NOTE: The TM-U325D does not support the electronic Journal. The electronic journal may be printed and
reported in the same way as the Ithaca PcOS emulation. The full range of [ESC][GS] journal control commands are
available in EPOS mode. See the section on initializing, printing and reporting the electronic journal starting on
page 163.
In EPOS mode, the electronic journal and the paper roll may be both selected. As there is limited space in the
electronic journal, the amount of data sent the journal should be limited.
NOTE: In EPOS emulation the POSjet
Validation mode.
Nov-07
POSjet
Hex
Off 00
On 01
Off 00
On 02
Off 00
On 04
Off 00
On 08
— —
®
1500 printer will recognize the Epson Slip Select command and enter
Rev M
®
1500
TM-U325D with EPOS enhancements
Decimal
0 Electronic Journal disabled.
1 Electronic Journal enabled
0 Paper roll disabled.
2 Paper roll enabled.
0 Slip Paper Disabled (EPOS only)
4 Slip Paper enabled (EPOS only)
0 Validation paper disabled.
8 Validation paper enabled.
— Undefined.
EPOS Control Codes
Function
Page 223