End Time - Smeg WNP96SLAA User Manual

• Automatic Dosage Setting
Activates by pressing down the related auxil-
iary function key (Automatic Dosage) for 3
seconds. With this function, the dosing
amounts of the Liquid Detergent and
Softener are changed.
Changing liquid detergent and softener
dosage settings:
• Press and hold Automatic Dosage key for
3 seconds.
• The liquid detergent dosage level settings
can be changed by pressing down "Spin "
selection key as shown below:
d1: Low
d2: Medium
d3: High
• The softener dosage level settings can be
changed by pressing down "Temperature"
selection key as shown below:
s1: Low
s2: Medium
s3: High
When dosage amount setting process is
completed, you can return to the main menu
by pressing the automatic dosage key. For
all programmes, dosing will be performed
based on the latest settings you have selec-
ted until you select a new setting.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol appears on the display. When this
warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol disappears.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
EN / 30