End Time; Starting The Programme - Smeg WNP04SEA User Manual

symbol appears on the display. When this
warning is displayed, you can release the
Auxiliary Function button 3.
To deactivate the child lock:
Press and hold the related auxiliary function
button for 3 seconds. After the countdown
as "3-2-1" on the display is over, Child Lock
symbol disappears.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
After a certain period of time after
the end time function is activated,
the machine goes into standby
mode and some LEDs on the screen
turn off. If there is any user input, the
LEDs will turn on again.
With the End Time function, the end time of
the programme may be set up to 24 hours.
After pressing End Time button, the pro-
gramme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.
In order for the End Time function is activ-
ated and the programme is completed at the
end of the specified time, you must press
Start/Pause button after adjusting the time.
If you want to cancel End Time function,
press On/Off button to turn off and on the
machine.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
a. Open the loading door, place the laundry
and put detergent, etc.
b. Select the washing programme, temper-
ature, spin speed and, if required, the
auxiliary functions.
c. Set the End Time of your choice by
pressing the End Time button. End Time
indicator lights.
d. Press Start / Pause. Time countdown
starts.
Additional laundry can be added into
the machine during the End Time
countdown. At the end of the count-
down, End Time indicator turns off,
washing cycle starts and the time of
the selected programme appears on
the display.

6.10 Starting the Programme

a. Press Start / Pause button to start the
programme.
b. The Start / Pause button's light which
was off before starts to illuminate steadily
now, indicating that the programme has
started.
EN / 29