Download Print this page
Wirepath Surveillance WPS-150-BUL-A Installation Manual

Wirepath Surveillance WPS-150-BUL-A Installation Manual

Advertisement

Quick Links

SAFETY INSTRUCTIONS
This information is provided to ensure your safety and to
prevent physical or financial loss. Please read this document
carefully before installing and operating the camera.
1. Handle with care.
This camera is not designed to resist heavy impact. Use
caution when handling to avoid damage to sensitive
internal components.
2. Do not install the camera under extreme temperatures.
This camera only operates under temperature conditions
between 14˚F ~ 122˚F.
3. Do not mount the camera directly facing bright lights.
Exposing the camera to strong light over long periods of
time will damage the camera's sensor.
4. Do not supply voltage other than 12VDC.
Higher voltages will damage the camera's
electronic components.
5. Do not install the camera in environments with extreme
humidity.
Installing the camera in environments with extreme humidity
may cause moisture to condense on the surface of the lens
or dome cover, which can affect picture quality.
FEATURES
• 1/4" Sony Color Super HAD CCD
The Sony CCD offers low Lux capability with a clear crisp
image.
• Fixed Lens
This camera features a wide-angle lens with a focal length
of 3.6mm for a wide range of applications.
• Built-In Infrared
IR LEDs provide the ability to capture images during night
and low light conditions.
• Backlight Compensation
Adjusts the exposure of a subject standing in front of a
bright light source.
© 2014 Wirepath Surveillance
WPS-150-BUL-A
BULLET
CAMERA
WPS-150-BUL-A Installation Manual
INSTALLATION MANUAL
Review manual thoroughly
before installation.
Retain for future reference.
PACKAGE CONTENTS
• (1) Camera
• (1) DC Plug
• (4) Screws
• (4) Wall fasteners
• (1) Foam Gasket
• (1) Manual
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.
The PS-12DC-1A is recommended.
SPECIFICATIONS
WPS-150-BUL-A Wirepath™ Surveillance IR Outdoor Bullet
Camera with Fixed Lens (420 TVL)
Image Sensor
Number of Pixels
Lens
Shutter Control
Auto Electronic Shutter
Auto Gain Control
Back Light Compensation
Auto White Balance
Sync. Mode
Scanning System
Resolution
S/N Ratio
Gamma
Minimum illumination
IR Range
Horizontal Sync.
Frequency
Video Output
Power Source
Power Consumption
Operating Temperature
Certifications
Weatherproof
Dimensions
Net Weight
1/4" Sony Color Super HAD CCD
NTSC: 510 x 492 (H)x(V)
3.6mm Fixed, Horizonal FOV 50˚
<NTSC.160~1/100,000 sec
ON
ON
ON
ON
Internal Sync
2:1 Interlace
420 TV Lines
>48dB
0.45
.3 Lux color, 0 Lux IR on
50ft
NTSC: 15.734KHz
1.0Vp-p,75ohm
3.6W-300mA
IR On: 300mA max; IR Off: 80mA
Max
14°F-122°F
CE, FCC, ROHS
IP66 Grade
6.57"(L) x 2.95"(H) with sun shade
and bracket fully extended
.77 lb
*Specifications are subject to change without notice
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the WPS-150-BUL-A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wirepath Surveillance WPS-150-BUL-A

  • Page 1 14˚F ~ 122˚F. 3. Do not mount the camera directly facing bright lights. Exposing the camera to strong light over long periods of WPS-150-BUL-A Wirepath™ Surveillance IR Outdoor Bullet time will damage the camera’s sensor. Camera with Fixed Lens (420 TVL) 4.
  • Page 2 WPS-150-BUL-A Installation Manual INSTALLATION INSTRUCTIONS TROUBLESHOOTING Recommended Cabling: solid copper RG59 or RG6 for video If you have trouble operating the camera, first refer to the following guidelines. If the problem persists, contact Technical and 18 AWG two-conductor for power.