Table of Contents
Advertisement
9.3.8.3.
FTP Settings
An FTP server is a remote computer server the camera connects to over the network or Internet. When an FTP server is
configured, recorded video and snapshot files can be stored on the server for later access. Contact the network administrator for
FTP server setup information.
•
Navigation: Log in as an administrator. From Home Screen, click "Config" button in top right corner, then click "Server
Settings" in left column menu. In the Server Settings sub-menu on the main window of the page, click "FTP Settings".
1
FTP Server
Username
Password
Port
Path
Mode
Create the
Folder
Test
Click "Apply" at the bottom-right of the page to save modified settings.
© 2014 Wirepath Surveillance
1
Enter the FTP server address to which files will be transferred.
Enter the FTP account username.
Enter the FTP account password.
Enter the port configured for FTP connections. Usually port 21.
Directory for the files to be saved to on the FTP server. Use underscores instead of spaces in file
names.
Select the data channel to use for logging into the FTP server, either "PORT" or "PASV". This is
an advanced setting and should not be changed from "PORT" unless instructed to by the network
administrator.
Select "Yes" to have a new folder created to contain each new file. The folder will be named the same
as the file. Select "No" to save all files directly to the selected folder.
Click to send a test file to the FTP server to confirm that new settings are correct.
WPS-300-BUL-IP Installation Manual
39
Advertisement
Table of Contents
