Description Of Device Functions - General Section; Notes On The Description Of Device Functions; Using The Table Of Contents To Locate A Function; Description - Endress+Hauser Proline Fieldcheck Operating Instructions Manual

Proline Fieldcheck
Endress+Hauser
9 Description of device functions - General
section
9.1

Notes on the description of device functions

The description of device functions is split into the following sections:
• Description of device functions - General section (→ Page 27 ff.)
This introduces you to the function matrix and provides you with an overview of the device
functions and a description of the device functions which apply to all applications.
• Description of device functions - Fieldcheck and electromagnetic measuring devices
(→ Page 39 ff.)
This provides you with a description of the device functions which only apply to the simulation
and verification of electromagnetic flow measurement systems.
• Description of device functions - Fieldcheck and Coriolis measuring systems
(→ Page 49 ff.)
This provides you with a description of the device functions which only apply to the simulation
and verification of Coriolis mass flow measuring systems.
• Description of device functions - Fieldcheck and vortex measuring systems
(→ Page 59 ff.)
This provides you with a description of the device functions which only apply to the simulation
and verification of vortex measuring systems.
There are various ways of locating the description of a function of your choice in the manual:
9.1.1 Using the table of contents to locate a function description
The designations of all the cells in the function matrix are listed in the table of contents. You can
use these unambiguous designations (such as USER INTERFACE, INPUTS, OUTPUTS, etc.) to
choose whichever functions are applicable to a particular set of conditions. The page references
show you exactly where to find the detailed descriptions of the functions in question. The table of
contents can be found on Page 3.
9.1.2 Using the graphic of the function matrix to locate a function

description

This step-by-step, top-down approach starts with the blocks, the highest level, and works down
through the matrix to the description of the function you need:
1. All blocks available, and their related groups are illustrated on Page 28. Select the block (or the
group within the block) which you need for your application and use the page reference to
locate the information corresponding to the next level.
2. The page in question contains a graphic illustration of the block with all its subordinate groups,
function groups and functions.Select the function which you need for your application and use
the page reference to locate the detailed function description.

Description of device functions - General section

27