IQH3-FP-V1
Introduction
1
Introduction
1.1
Content of this Document
This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:
•
Product identification
•
Delivery, transport, and storage
•
Mounting and installation
•
Commissioning and operation
•
Maintenance and repair
•
Troubleshooting
•
Dismounting
•
Disposal
Note
For full information on the product, refer to the further documentation on the Internet at
www.pepperl-fuchs.com.
Note
For specific device information such as the year of construction, scan the QR code
on the device. As an alternative, enter the serial number in the serial number search
at www.pepperl-fuchs.com.
The documentation comprises the following parts:
•
This document
•
Datasheet
In addition, the documentation may comprise the following parts, if applicable:
•
EU-type examination certificate
•
EU declaration of conformity
•
Attestation of conformity
•
Certificates
•
Control drawings
•
Instruction manual
•
Functional safety manual
•
Other documents
1.2
Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-
ing lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation, com-
missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
1.3
Intended Use
Always operate the device as described in these instructions. Only in this way, the safe function
of the device and the connected systems is guaranteed.
The protection of operating personnel and plant is only given if the device is used in accor-
dance with its intended use.
5