Pepperl+Fuchs IDENTControl IQH3-FP-V1 Manual page 22

Rfid read/write device
Table of Contents

Advertisement

IQH3-FP-V1
Operation
Command:
Response:
Single Write Words SW
The read/write device makes one attempt to write <WordNum> 32-bit words from the address
<WordAddr> onward.
Command:
Response:
Enhanced Buffered Write Words EW
The read/write device continuously attempts to write <WordNum> 32-bit words from the
address <WordAddr> onward. The device sends a response if the command is successful.
The read/write device reads the written tag until it leaves the sensing range or a new tag
reaches the sensing range.
The read/write device continuously attempts to write to the new tag.
If there is no new tag in the sensing range, and if the written tag leaves the sensing range, a sta-
tus 5 is reported.
Command:
Response:
Single Write Words with Lock SL
The read/write device makes one attempt to write <WordNum> 32-bit words from address
<WordAddr> onward and to block overwriting.
The data is write-protected at the end of the write process, provided the tag offers this function.
The write protection is permanent and cannot be undone.
Command:
Response:
Enhanced Write Words with Lock EL
The read/write device continuously attempts to write <WordNum> 32-bit words from address
<WordAddr> onward and to block overwriting. The device sends a response if the command is
successful.
The data is write-protected at the end of the write process, provided the tag offers this function.
The write protection is permanent and cannot be undone.
The read/write device reads the written tag until it leaves the sensing range or a new tag
reaches the sensing range.
The read/write device continuously attempts to write to the new tag.
If there is no new tag in the sensing range, and if the written tag leaves the sensing range, a sta-
tus 5 is reported.
Command:
Response:
Single Get Configuration SG
The read/write head makes precisely one attempt to read the AFI or DSFID.
Command:
Response:
24
ER <ChanNo> <WordAddr> <WordNum> <CHCK> <ETX>
<Status> <ChanNo> <Data> <CHCK> <ETX>
SW <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <ChanNo> <CHCK> <ETX>
EW <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <ChanNo> <CHCK> <ETX>
SL <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <ChanNo> <CHCK> <ETX>
EL <ChanNo> <WordAddr> <WordNum> <Data> <CHCK> <ETX>
<Status> <ChanNo> <CHCK> <ETX>
SG <ChanNo> <FunctionNo> <CHCK> <ETX>
<Status> <ChanNo> <Data 1> <Data 2> ...<Data n> <CHCK> <ETX>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iqh3-fp-v1

Table of Contents