Pepperl+Fuchs IDENTControl IQH3-FP-V1 Manual page 18

IQH3-FP-V1
Commissioning
Reading tags
enhanced buffered read read-only code
Send the enhanced buffered read read-only code command to the read/write device. The blue
LED on the read/write device lights up.
Command:
Confirmation:
Response:
Table 5.2
Move a tag into the read/write device's sensing range. When the tag has been detected and the
read-only code has been read out, the yellow LED on the read/write device lights up. The read-
only code is displayed in the terminal program.
Response:
Table 5.3
Parameterizing the Read/Write Device
Requesting and Setting the Transmit Power
Read out the read/write device's transmission power using the read parameter PT command:
Command:
Confirmation:
Response:
Table 5.4
The transmit power of the read/write device is set to Power mode.
Change the transmit power of the read/write device to Eco mode using the write parameter PT
command:
Command:
Confirmation:
Response:
Table 5.5
20
Serial Ethernet
EF1 .00.04.1D.02
- .00.06.1D.02.FF.0E
.35.31 .00.06.1D.02.05.0F
enhanced buffered read read-only code, no tag in the sensing range
Serial Ethernet
.30.31.E0.08.01. .00.0E.1D.02.00.10.E0.08.
48.82.ED.9B.AC 01.48.82.ED.9B.AC
enhanced buffered read read-only code, tag is entering the sensing range
Serial Ethernet
RP1QPT.00.00 .00.0A.BE.02.00.51.50.54.
00.00
- .00.06.BE.02.FF.33
.30.31.00.04 .00.0A.BE.02.00.34.00.02.
00.04
read parameter, Power mode
Serial Ethernet
WP1QPT.00.02.0 .00.0C.BF.02.00.51.50.54.
0.02 00.02.00.02
- .00.06.BF.02.FF.35
.30.31 .00.06.BF.02.00.36
write parameter, Eco mode
PROFIBUS/PROFINET
.1D.02
.1D.02.FF.0E
.1D.02.05.0F
PROFIBUS/PROFINET
.1D.02.00.10.E0.08.01.48.
82.ED.9B.AC
PROFIBUS/PROFINET
.BE.03.00.51.50.54.00.00
.BE.02.FF.33
.BE.02.00.34.00.02.00.04
PROFIBUS/PROFINET
.BF.02.00.51.50.54.04.00.
02.00.02
.BF.02.FF.35
.BF.02.00.36