Connection Cable For Read/Write Devices And Trigger Sensors; Cable Connectors For The Power Supply - Pepperl+Fuchs IDENTControl IQH3-FP-V1 Manual

IQH3-FP-V1
Product Description
3.5.3

Connection Cable for Read/Write Devices and Trigger Sensors

Compatible connection cables with shielding are available to connect the read/write devices
and trigger sensors.
Figure 3.6
Accessories
2 m long (straight female, angled male)
5 m long (straight female, angled male)
10 m long (straight female, angled male)
20 m long (straight female, angled male)
Field attachable female connector, straight, shielded
Field attachable male connector, straight, shielded
Field attachable female connector, angled, shielded
Field attachable male connector, angled, shielded
Dummy plug M12x1
3.5.4

Cable connectors for the power supply

Compatible M12 sockets with an open cable end for connecting the IDENTControl to a power
supply are available in different lengths.
Figure 3.7
Accessories
Length 2 m (straight socket)
Length 5 m (straight socket)
Length 10 m (straight socket)
Description
V1-G-2M-PUR-ABG-V1-W
V1-G-5M-PUR-ABG-V1-W
V1-G-10M-PUR-ABG-V1-W
V1-G-20M-PUR-ABG-V1-W
V1-G-ABG-PG9
V1S-G-ABG-PG9
V1-W-ABG-PG9
V1S-W-ABG-PG9
VAZ-V1-B3
Designation
V1-G-2M-PUR
V1-G-5M-PUR
V1-G-10M-PUR
13