Table of Contents
Advertisement
IQH3-FP-V1
Product Description
3.3
Indicators
The RFID read/write device has four LEDs to indicate the operating state. The various indica-
tors denote:
LED
Green
Blue
Yellow
Red
3.4
Electrical Connection
Caution!
Cable specifications
The maximum permissible temperature of the connection cable must be at least +70 °C. The
minimum diameter of the connection cable must be 22 AWG or 0.34 mm².
2
Figure 3.3
The IQH3-FP-V1 read/write device is connected to the IDENTControl control interface via an
M12 x 1 connector.
3.5
Accessories
3.5.1
IDENTControl
The read/write device is connected to Pepperl+Fuchs IDENTControl control interfaces.
Figure 3.4
Description
On: Device is ready for operation
On: Write/read attempt is being performed
On: Write/read attempt was successful
On: Interference from external signals in the usage spectrum, range may
be limited
Slow flashing (1 Hz): Metal interference
Fast flashing (10 Hz): Excess temperature
1
5
4
3
1
+
2
A
3
-
4
B
5
do not connect
Shield
11
Advertisement
Table of Contents
