Display - Insportline RowAir User Manual

During program selection, the button serves as a return to the previous program. During the setting of
the values, the button serves as a return to the previous value after confirmation.
During the exercise, press the button to stop the exercise. Calorie and watt values are reset to zero.
Press the button again to view the exercise summary. Press the button a third time to return the
control panel to standby mode.
If you want to save the exercise values (does not apply to the quick start program), press the button to
save the values to memory.
Holding down the button resets all values and the control panel switches to standby mode.
Up button
Press the button to increase the value. Hold the button to increase the value faster.
If you are viewing the data in the memory, the button serves as a navigation button.
Down button
Press the button to decrease the value. Hold down the button to decrease the value faster.
If you are viewing the data in the memory, the button serves as a navigation button.
ENTER button
Press to confirm program selection or value setting.
Right button
If you are setting a program, press the button to move between the digits.
You try to view the data in the memory, by pressing the button you switch between individual cycles.
Left button
If you are setting a program, press the button to move between the digits.
You try to view the data in the memory, by pressing the button you switch between individual cycles.

DISPLAY

Time and date
Range: 0:00:00 – 17:59:59 (hours, minutes, seconds)
Time is added in all cases, except if a time countdown is set.
The maximum value in the quick program is 02:34:59, in all other programs the maximum value is
17:59:59. Once the value reaches its maximum, it will count again from 0:00:00.
D, M, Y (day, month, year) are only displayed when the control panel is in standby or memory mode.
To reset the time and date, hold the PROG and DISPLAY buttons simultaneously in standby mode.
Strokes/min (S/M)
Displays the number of strokes per minute.
Range: 1 – 99
Time/500m, ave time/500m, rest time
Range: 00:00 – 99:59 (minutes:seconds)
Time/500m shows the approximate number of strokes to cover 500m
Ave time/500m displays the average time required to cover 500m
Rest time is the rest time in the interval program
19