Control Panel; Introduction; Function - Insportline RowAir User Manual

CONTROL PANEL

INTRODUCTION

Turn on
As soon as you move the handles, the quick start program will start or press any button and the
control panel will switch to standby mode.
Turn off
If the control panel is in standby mode or no activity is recorded for 20 seconds, it turns off.
Battery replacement
The control panel is powered by 2x D batteries. The batteries are located on the back of the control
panel.
If the batteries are not inserted, you can still exercise in the quick start program.

FUNCTION

PROG button
In standby mode, press the program selection button. You can set targets for distance, time and
calories or you can choose an interval program for distance, time and calories.
Note: The default program is a quick start program.
DISPLAY button
In the exercise mode, hold the button, you will hear a beep and the display will show other data. Hold
the button again, you will hear a 2x beep and the display will show the previous data.
By pressing the button while viewing the exercise summary or viewing the information stored in the
memory, you switch between the two types of data.
STOP button
18