Insportline RowAir User Manual page 28

2. Place the frame (1) in the position see picture below. Unhook the left rubber hook (12L) from
the main frame (1). Make a mark on the rubber (38) and move the hook approximately 5 cm
forward. Unhook the rubber according to points 1-3 below. Move the rubber forward about 5
cm, then hook into the hooks (12L) according to points 4 - 6. Hook the hook (12L) into the
main frame (1)
Adjust the right side. Always adjust the distance equally on both sides.
3. Support the trainer again as shown in the image below. Slide the cover (70) back into the
frame (1) and then attach the cover (68) to the frame. Then fix the covers (160 and 161) to the
frame (1) with screws. Connect the rail (2) to the frame (1).
28