Using the GFS4400 Adapter
USING THE GFS4400 ADAPTER
Customers can take advantage of the accessory "Mount-
ing Adapter to replicate the GFS4400 fixing holes" (Part
Number: MA-4500-BK) to replace their setups based on
TM
previous Gryphon
I GFS4400 family, with the new Gry-
TM
phon
I GFS4500. Since the two products have different
mounting holes, the Adapter Plate can be attached to the
GFS4500 to replicate the same mounting holes of the pre-
vious GFS4400.
Two M3x10 screws are required to attach the Mounting
Adapter to the GFS4500 (already included in MA-4500-BK
package).
M3 screws are then required to attach the adapter to the
surface, maximum length is 6mm (not included in MA-
4500-BK package).
34
GRYPHON™ I GFS4500