Setting Up The Reader; Connecting To The Host Interface - Datalogic QW2520 Quick Reference Manual

SETTING UP THE READER

Follow the steps below to connect and get your reader up
and communicating with its host.
1. First connect the Cable to the reader then to the Host
as shown below.
2. Configure the Interface
3. Program the Reader starting on page
(optional, as needed).

Connecting to the Host Interface

Available only for QuickScan
Available only for QuickScan
(see page 11).
™
™
QUICK REFERENCE GUIDE
Setting Up the Reader
page 19
USB
WEDGE
QD2500
RS-232
QD2500
5