Parts Of The Reader; Selecting The Interface Type; Interface Selection - Datalogic QuickScan QD2590 Quick Reference Manual

Parts of the Reader

PARTS OF THE READER
1. Cable Release Hole
2. LED

SELECTING THE INTERFACE TYPE

Upon completing the physical connection between the
reader and its host, proceed directly to Interface Selection
below for information and programming for the interface
type supported by the reader and scan the appropriate
bar code to select your system's correct interface type,
according to your application.
For interfaces other than those listed in this manual, see
the QuickScan™ QD2590 Product Reference Guide (PRG),
available online at

Interface Selection

The reader will support all the following host interfaces:
RS-232 STD
•
RS-232 WN
•
• IBM46XX port 9b (a specific cable's required)
USB HID POS
•
USB Toshiba TEC
•
USB (Keyboard, COM, OEM)
•
USB Composite (Keyboard + COM)
•
• USB for Magellan Scanners
Keyboard Wedge
•
Information and programming options for each interface
type are provided in this section. For defaults and addi-
8
QUICKSCAN™ QD2590
3. Scan Window
4. Trigger
www.datalogic.com.