Bc412 Set Length 1 - Datalogic Gryphon 2D Series Product Reference Manual

1D Symbologies

BC412 Set Length 1

This feature specifies one of the bar code lengths for
page
212 Mode, or the first fixed length if in
includes the bar code's data characters only.
The length can be set from 01 to 50 characters. See
for more detailed programming instructions.
Select BC412 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
212. Length 1 is the minimum label length if in
$CBCL1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
BC412 Length Control on
Variable Length on page
Fixed Length on page 212
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
representing your desired character(s). End by
pad
scanning the ENTER/EXIT bar code again.
CANCEL
Mode. Length
on page 302
Appendix D, Key-
~
213