SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 4-12 Installing a 24 V power module
----End
4.6.5 Installing the PoE Module
Step 1 Loosen screws (do not remove the screws) and remove the mounting board.
Step 2 Remove screws from the PoE module installation position.
Step 3 Place the PoE module at the installation position and align the mounting holes.
Then secure the PoE module.
Step 4 Secure the mounting board.
Issue 05 (2023-09-26)
NO TE
Indicators should be in the lower left corner.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
50