SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 7-6 Removing a faulty SmartMBUS CCO module
Step 3 Install the mounting ears on a new SmartMBUS CCO module.
Step 4 Install the new SmartMBUS CCO module.
Step 5 Connect the cables based on their labels.
----End
7.3.6 Replacing the SmartLogger
Step 1 Disconnect the cables from the SmartLogger and label the cables.
Step 2 Remove the faulty SmartLogger and its cabinet-mounting bracket.
Issue 05 (2023-09-26)
Copyright © Huawei Technologies Co., Ltd.
7 System Maintenance
87