Huawei SmartACU2000D User Manual page 68

SmartACU2000D Smart Array Controller
User Manual (With PID Modules)
Figure 5-9 Removing a fastener
Step 3 Connect one end of the optical jumper to the fiber adapter.
Step 4 Route the other end of the optical jumper through the cable hole on the side of
the ATB, and connect the cable to the ATB.
Step 5 Connect the peripheral optical cable to the ATB, splice the optical cable and the
optical jumper, and then wind the spliced cable around the fiber spool on the ATB.
Only professionals are allowed to splice fibers.
Issue 05 (2023-09-26)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
61