Wifi Module - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Indicators
Table 3-35 WiFi converter indicators
Indicator
RUN
ALM
WiFi
WPS

3.3.9 WiFi Module

The WiFi module provides WiFi signals for equipment such as pads and mobile phones to
interact with the host computer.
Issue 06 (2020-01-02)
WPS function: If you choose Advanced settings > WPS connection on the WLAN of the intelligent
device and press the WPS button on the WiFi converter at the same time, the intelligent device will
quickly connect to the WiFi hotspot of the micro-module.
Color
Green
Red
Green
Green
Copyright © Huawei Technologies Co., Ltd.
Name Status
Running Blinking at
long intervals
status
indicator
Blinking at
short intervals
Alarm Steady on
indicator
Off
WiFi status Steady on
indicator
Blinking
WPS mode Off
indicator
Blinking
3 Device Description
Description
The WiFi converter
successfully registers with the
ECC800 and the software runs
properly (the indicator blinks
at 0.5 Hz, on for 1s and then
off for 1s).
The WiFi converter fails to
register with the ECC800 or
the communication is
disconnected (the indicator
blinks at 4 Hz, on for 0.125s
and then off for 0.125s).
A system failure alarm is
generated.
No system alarm is generated.
The WiFi converter is powered
on but there is no data
communication.
Data communication is in
progress.
The WPS is normal.
WPS matching mode. If the
matching fails, the WPS
indicator turns off after
blinking for 2 minutes. If the
matching is successful, the
WPS indicator turns off.
46