Huawei SmartACU2000D User Manual page 101

Smart array controller

Hide thumbs Also See for SmartACU2000D:

Table of Contents

SmartACU2000D Smart Array Controller

User Manual (With PID Modules)

Figure 7-14 Removing a faulty PID module

Step 6 Install a new PID module.

Step 7 Open the maintenance compartment door of the PID module, and remove the

cover from the connection box.

Step 8 Connect the removed cables to the new PID module based on the cable labels.

Step 9 Secure the pipe connector to the PID module.

Step 10 Install the connection box cover and close the maintenance compartment door of

the PID module.

Step 11 Install the support bar and close the PID module cabinet door.

----End

Issue 05 (2023-09-26)

NO TE

After ensuring that the PID module is powered on, set parameters by referring to the

SmartLogger3000 User Manual .

7 System Maintenance

Table of Contents